Mud reagents
Line of reagents for drilling muds developed by our own laboratory equipped with the state of the art equipment
Drilling muds laboratory performs incoming control of reagents, quality control and sampling
We carry out synthesis and laboratory testing of new effective lubricating additives for drilling muds
Preview
Anti-balling detergent “DPS”
Designed to reduce the surface tension of all water-based muds and reduce the tendency for adhesion of clay particles.
Additive for drilling muds “SINSIL”
Designed to control the viscosity (dilution) of the drilling mud as well as to prevent bit balling.
Organic inhibitor “BIO XX”
BIO XX effectively suppresses the processes of hydration and swelling of clays and shale, prevents further dispersion of drilled clay cuttings, helps to reduce BHA elements balling and setting of cuttings above drilling bit.
Anti-adhesive additive “OPTIBUR”
Designed to increase the speed of drilling in plastic rocks, prevent balling, reduce friction of the drill string against the borehole walls, and prevent sticking and overpull while round trip operations.
Modified Starch “MULTISTAR”
Filtrate reducer for fresh mineralized and highly mineralized process fluids containing bivalent metals Ca and Mg used for drilling and workover.
Drilling mud lubricant “BL”
Designed for treatment fresh and low-mineralized drilling muds when drilling vertical and directional sections of oil and gas wells.
Drilling mud lubricant “BL-SALT”
Designed for treatment salt and salt-saturated drilling muds with a high content of salts of mono- and bivalent metals.
Drilling mud lubricant “BL-ECO”
Designed for treatment fresh, salt and salt-saturated drilling muds.
Polyacrylamide for drilling muds “SINPOL HV”
Designed to stabilize rocks containing problem clay and shale.
Polyacrylamide for drilling muds “SINPOL LV”
It is used to reduce the filtration of drilling muds and effectively operates in a wide range of geological conditions.
Polyanionic cellulose low viscosity “ANIPOL LV”
Promotes the formation of a thin, dense, elastic and low-permeability filter cake, reducing the zone of filtrate penetration into the formation.
Polyanionic cellulose low viscosity “ANIPOL HV”
Promotes the formation of a thin, dense, elastic and low-permeability filter cake, reducing the zone of filtrate penetration into the formation.
Antistick reagent “BURINTEKH-ANTISTICK”
Complex reagent for the installation of fluid bath for releasing differential sticking.
REAGENT “BIT-AF”
Designed for cuttings transport stimulation by drilling muds without increasing the viscosity of the fluid. It is also used in cements to increase strength.
Drilling mud additive “Valkyrie”
Multifunctional agent to improve drilling in difficult geological conditions.
Xanthan biopolymer “BIOPOL”
Designed as a water-based muds viscosifier.
Drilling mud additive “Dry Lubricant”
It is used to reduce the coefficient of friction of drilling muds.
Process fluid for bottomhole formation zone chemical treatment “BARKBEETLE”
Designed to remove filter cake and chemical cleaning of the pay zone after drilling-in and killing.
Composition “BURINTEKH-BLOCK COMPOSITION”
Designed for temporary blocking pay zones during remedial cementing and workover.
Reagent “POLYEMULAN C”
Designed for additional stabilization of invert-emulsion muds as well as for hydrophobization of drilled rocks.
Reagent “POLYEMULAN E”
It is the primary emulsifier and stabilizer for the “EMULCARB” system used in well drilling.
Documentation
Publications
Patents
Related production:
Discuss the project
Our experts are always ready to advise you and answer your questions.