BURINTEKH
ru
Company Products
- //
- Overview
- Rock Destruction Drilling Tools
- Coring Tools
- Sidetracking and Well Workover Operation Tools
- BHA Components
- Jars
- Chemicals
- Casing Accessories "BITART"
Due to new and unique solutions we are constantly expanding our range of high performance PDC bits, providing high quality well construction and achieving maximum techno-economic performances.
Great international experience, modern production technologies and research base allow us to produce reliable and quality tricone bits, expanding area of application of bits effectively working in heavy geological drilling conditions.
Available solution for drilling out cement and sand plugs, liner equipment, reaming a wellbore.
Design features of bicentric bits provide good steerability and high ROP while simultaneous drilling and reaming.
Highly effective rock destruction tool for drilling hard and abrasive formations with high-speed mud motors.
For enlarging any interval of wellbore and reaming while drilling as a part of BHA comprising pilot drill bit.
For reaming while drilling as a part of BHA comprising pilot drill bit or enlarging previously drilled intervals.
Core heads are being designed depending on concrete geological-technical data in accordance with customer conditions and priorities for any existing in the world core barrels.
Core barrel design is multi-purpose and allows using one barrel for coring isolated and non-isolated core due to using fiberglass core tubes and insulating fluid.
The most effective solutions for window milling and sidetracking both with and without cement plug.
Expandable milling tools for continuous casing section milling in any interval of wellbore.
Cementable and non-retrievable kits, providing necessary tilting of drilling assembly with respect to bore axis for intentional sidetracking.
Hydromechanical tools for cutting part of casing or tubing string in well for further retrieving to surface during repair-and-renewal operations.
Wide range of highly effective milling tools for various operations in cased and open holes.
Special BHA component required for calibrating and reaming horizontal and high dogleg severity well sections.
Hydraulic equipment for punching holes in tubing and casing to make a communication between the interior cavity and the exterior annular space.
BHA components for calibrating and reaming a wellbore and stabilizing drilling string.
Hydraulic tools for providing optimal uniform loading of rock destruction drilling tool and for damping of axial vibrations.
Hydraulic tools for damping of torsional and axial vibrations, impacts acting on PDC bit while drilling, and for providing optimal uniform loading of rock destruction tool.
Mechanical tools for releasing a stuck downhole tool or equipment.
Hydraulic and mechanical right- and left-handed jars for releasing a stuck tool by up-and-down torsional impacts.
Hydraulic and mechanical right- and left-handed jars for releasing a stuck downhole tool by up-and-down impacts.
Swelling Inhibitors for Clays and Shales
BIO XX
RTP
Anti-balling and Anti-stick Additives
DPS, OPTIBUR, ANTISTICK
BL, BL SALT, BL-ECO
ANIPOL VV, ANIPOL NV, SINPOL VV, SINPOL NV, MULTISAR
Reagents for Effective Removal of Cuttings
Fiberglass
Sulfonated asphaltite, MULTIOL
IZOKOR
RTM-75
BITART type 120 and modifications
It designed for fitting bottomhole assembly for the purpose of its direction along the wellbore and protection from damage during running and well casing.
BITART type 140 and modifications
It designed for fitting bottomhole assembly for the purpose of its direction along the wellbore and protection from damage during running and well casing.
BITART type 150 and modifications
It designed for fitting bottomhole assembly for the purpose of its direction along the wellbore and protection from damage during well construction of difficult wells.
BITART type 210 and modifications
It designed for fitting bottomhole assembly for the purpose of its direction along the wellbore and protection from damage during running as well as preventing fluid or cement slurry backflow from annular space to string during cementing.
BITART type 250 and modifications
It designed for fitting bottomhole assembly for the purpose of its direction along the wellbore and protection from damage during well construction of difficult wells.
BITART type 310 and modifications
It is designed for separating spacer fluid and cement slurry squeezed to annular space during casing cementing. It provides cleaning of casing inner surface from cement slurry residues as well as leak-proof fit to back valve and cementing process end signal.
BITART type 320 and modifications
It is designed for separating spacer fluid or mud and cement slurry squeezed to annular space for the purpose of excluding the shift zone.
BITART type 410 and modifications
It designed for fitting bottomhole assembly for the purpose of preventing fluid or cement slurry backflow from annular space to string during cementing.
Company Services
- //
- Overview
- Drilling
- Sidetracking
- Repair and Insulation Works
- Laboratory Research
- Jars and BHA Components Renting
We are the leader in qualitative and effective drill bit service in the Russian Federation.
Positive Displacement Mud Motors
This type of service is auxiliary and provided only with the Drill Bits.
Carrying out of coring activity with maximum effectiveness and high techno-economic performances utilizing core heads and barrels of own production.
Hole Enlargement of any complexity is carried out by using reamers of own production.
Services of engineering-technological support in directional and horizontal drilling is carried out using both own MWD systems or customer ones.
Currently we offer optimal and effective solution, for specialists engaged in drilling directional and horizontal wells, as MWD system «COMPASS».
Drilling Fluids & Process Liquids
We offer our solutions for deep and ultra deep wells and sidetracks drilling and completion in difficult geological conditions as our own drilling fluid systems and process liquids.
We offer casing window milling and sidetracking services in one trip using milling kits of own production.
We render continuous casing section milling services for subsequent sidetracking using expandable mills of own production.
Specialists of «BURINTEKH», Ltd have worked out and successfully use the technology of Repair and Insulation Works for cutting off the migration paths of formation water along the wellbore using the expandable tools and expansive backfill materials of own production.
Drilling Fluid and Its Components Testing
Drilling Fluid Laboratory carries out the drilling fluid parameters measurement and chemicals quality control using standard and non-standard methods.
Core and Formation Fluid Testing
The laboratory carries out the research on influence of drilling fluids and process liquids on reservoir properties of bottomhole formation zone.
Cement Slurry and Stone Testing
Cementing Laboratory performs the analysis and quality control of basic cements, chemical reagents and additives used in well cementing, reveals the reasons of low quality cementing.
Jars and BHA Components Renting
«BURINTEKH», Ltd leases out own manufactured products, such as axial and torsional jars for drilling and workover operations, BHA components (stabilizers, centralizers, dampers, bit protectors, string reciprocators).
Company
- About Company
- Geography of Activities
- Licenses & Certificates
- Press-center
- Careers
- Resources
- Health, Safety and Environment
Founded in 1999, «BURINTEKH», Scientific and production enterprise, limited liability company continues as the leading Russian developer and manufacturer of high-quality competitive tools for well drilling and workover operations.
«BURINTEKH», Ltd provides a wide range of oilfield services in complex or separately.
The Company operates in 28 regions of the Russian Federation.
Our Products are exported to CIS countries, Middle East, North Africa, Europe and North America.
Company has Integrated Quality Management System in compliance with
This section contains company news.
We are always glad to see people in our team who can solve extraordinary tasks, manage changes and achieve results. We appreciate such qualities as creativity, educability, commitment to professional development and focus on results.
Official customer feedbacks on product performance and service quality.
Achieved performance records by utilizing our products.
Our articles published in various magazines and newspapers.
Find out more about our Products and Services.
IADC Classification for Roller Cone, PDC, Diamond Bits and Core Heads.
Labor Safety Policy, Environmental Policy, Anti-alcohol and Counter-drugs Policy.
This section contains company safety management standards.
Rational Environmental Management
Enterprise management pays special attention to ecological aspect of manufacturing, stands for rational exploitation of natural resources.
Main principle of control over provision labor safety is regular checks conducted by managers of different level of management.
Company Contacts
«BURINTEKH», Ltd is a company operating in the oil & gas sector and mininig industry of the Russian Federation, CIS, Middle East, Africa and North America, combining in its structure the research, designing and manufacturing facilities, located in Ufa (Russia) and Fort Worth (USA), 9 separate divisions in 6 regions of the Russian Federation, subsidiaries in the United States, Canada and CIS countries.
Subsidiaries are located in Kazakhstan, Turkmenistan, Azerbaijan, United States and Canada.
The Company has its representatives in 16 towns of 8 regions of the Russian Federation.
News
Prime Minister of the Russian Federation Dmitry Medvedev signed the resolution “On Awarding of Russian Federation Government Prize in the field of quality for 2015 year”.
22-23 of October 2015 in Ufa was the first trans-regional forum of SCO and BRICS countries dedicated to cooperation matters of small and medium business.
Ministry of Industry and Trade of the Russian Federation within the conference “Oil and gas service in Russia” which took place on 14th of October 2015, made the survey of consumers of services in oil and gas sector for detecting the best service company.
BURINTEKH”, Ltd took part in opening session of the 13th Moscow international exhibition “Oil and Gas”/MIOGE 2015 which is held from 23 to 26 of June 2015 in Moscow in “Expocenter” exhibition center.
“BURINTEKH”, Ltd management will take part in annual International economic forum which will be held on the basis of exhibition center “Lenexpo” from 18 to 20 of June under the slogan: “It’s time for action: by joint efforts to stability and growth!”